FirePro vs others
Category : Fire Extinguishing Aerosol System
| EFFECT ON HUMANS |
EFFECT ON PROPERTY |
EFFECT ON ENVIRONMENT |
|
| Foam and Water | Human protection necessary when used in fixed systems. | May be corrosive due to large water concentration Residue is harmful to delicate electronics |
Residue can be difficult to dispose of and foam can be poisonous |
| Water | Generally not dangerous to humans when fighting fire | Can cause extensive damage to property |
Can release harmful fumes and substances on extinguishment |
| CO2 | Highly dangerous to humans in fire fighting concentrations. |
Cooling effect causes condensation mist harmful to electronics |
In general more CO2 is released from other sources |
| Inert gases |
May lead to inadequate oxygen supply to the brain when used alone |
No damage caused | Naturally occurring components that do not pose a threat |
| Halon | Can be used in human presence but has been banned. |
No damage caused | Harmful to the environment |
 |
Can be used in human presence in designed concentration and with proper precautions |
No damage caused | Friendly to environment It is ozone friendly It is a Green Product |
Various Comparisons Between Agents
Category : Fire Extinguishing Aerosol System
The attempt to take the necessary actions to protect human health and the environment against adverse effects resulting or likely to result from human activities which can modify the ozone layer has led to:
The Montreal Protocol on Substances that Deplete the Ozone Layer as adjusted and/or amended in London 1990 - Copenhagen 1992 - Vienna 1995 - Montreal 1997 - Beijing 1999
| Various comparisons between agents | ||||
| Halon 1301 | Other gas systems |
CO2 | |
|
| Ozone Depletion Potential (O.D.P.) | High | Low | Zero | Zero |
| Global Warming Potential (G.W.P.) | Moderate | Low | Zero | Zero |
| Atmospheric Life-time (A.L.T.) | High | V.High/Med. | V.High | Low |
| Toxicity | Low | Low | High | None |
| Conductivity | Low | Low | Low | N/A < 75 Kv |
| Corrosiveness | Moderate | Mod/Low | Mod/Low | None |
| Volumetric efficiency | Good | Low | Low | Good |
|
Extinguishing density (gr/m3) |
200- 350gr/m3 |
350- 950gr/m3 |
700- 1500gr/m3 |
from 30- 60+gr/m3 |
Health problems associated with low concentrations of oxygen in the ambient air, can generally be summarised as:
* 16% can lead to impaired judgment and breathing
* 14% can lead to faulty judgement and rapid fatigue
* 6% can lead to breathing difficulties and be fatal in minutes
It must however be understood that the above conditions are dependent on the length of exposure time.
FP-20
Category : Fire Extinguishing Aerosol System
FP-20E
Category : Fire Extinguishing Aerosol System
FP-80
Category : Fire Extinguishing Aerosol System
FP-200
Category : Fire Extinguishing Aerosol System
FP-200 Movie Demonstration Link 1
FP-200 Movie Demonstration Link 2
FP-200M
Category : Fire Extinguishing Aerosol System
FP-500
Category : Fire Extinguishing Aerosol System
FP-1000M
Category : Fire Extinguishing Aerosol System
FP-1200
Category : Fire Extinguishing Aerosol System
FP-2000
Category : Fire Extinguishing Aerosol System
FP-3000
Category : Fire Extinguishing Aerosol System
FP-5700
Category : Fire Extinguishing Aerosol System
| ICT ROOM |
| REPEATER ROOM |
| UTILITY ROOM |
FirePro Product Information
Category : Fire Extinguishing Aerosol System
.: FirePro® Fire Extinguishing Aerosol Systems :.
Our company is a distributor of FirePro® Fire Extinguishing Aerosol System products in Indonesia. Our company also participate in the prevention and mitigation of fire hazard by promoting sales of FirePro® Fire Extinguishing Aerosol System product.
Some aspects that are owned by FirePro® products include the following:
1. USEFULNESS OF FirePro®
FirePro® Fire Extinguishing Aerosol System Product is a tool to extinguish the fire, the content of FirePro® is aerosol material ingredients, it consists of Potassium Nitrate, Potassium Carbonate, Magnesium and Polymer Epoxy Resins.
HOW FirePro® GENERATOR UNIT WORKS / ACTIVATION METHOD
Mechanism or the way of FirePro® works is like the following, if thermocord (axis), stung by a fire then materials contained in the aerosol generator unit will discharge or spray fire in a matter of a few seconds a fire can be extinguished. Electrical wires can also be connected to Power Supply 6-36V DC and can also be connected to the fire alarm control panel, which is to control the location of the fire generator units installed.
TO WATCH FirePro® Product VIDEO DEMO :
Type FP-20 click here
2. FirePro® ADVANTAGE
• The ability to effectively extinguish the fire, and not necessarily with expensive products
• On FirePro® efficiency and effectiveness is greater than other fire system products
• Installation is more practical and easy
• Fluid is natural mineral so there is no outlet obstruction
• No high pressure container
• Save space and weight
• No damage to property and electronic devices
• On FirePro® efficiency and effectiveness is greater than other fire system products
• Installation is more practical and easy
• Fluid is natural mineral so there is no outlet obstruction
• No high pressure container
• Save space and weight
• No damage to property and electronic devices
3. ENVIRONMENTALLY FRIENDLY / ECO-FRIENDLY
• Global warming potential = 0
• No Toxic
• Atmospheric lifetime
• Does not leave a spot or does not make rusty
• No Ozone depletion potential
• No Ozone depletion
4. APPLICATIONS
• Archives Room
• Raised Floors Room
• Suspended Ceilings
• Planning Room
• Electrical Sub-stations Room
• Computer and Data Room
• UPS Systems Room
• Electrical Panel
• Electrical Cabinet
• Soldering Machines
• TV Sets, PC Screens
• Personal Computer
• Marine Vessel
• Cars
• Train & Other vehicle
• and many more...
• Raised Floors Room
• Suspended Ceilings
• Planning Room
• Electrical Sub-stations Room
• Computer and Data Room
• UPS Systems Room
• Electrical Panel
• Electrical Cabinet
• Soldering Machines
• TV Sets, PC Screens
• Personal Computer
• Marine Vessel
• Cars
• Train & Other vehicle
• and many more...
FirePro® ACTIVATION METHOD
• Electrical Activation
Activation that is integrated with Smoke Detector and Heat Detector
• Thermocord Activation
Activation with thermocord/axis
• Manual (Hand-Operated Extinguishing Units)
Activation by pulling safety pin
Activation that is integrated with Smoke Detector and Heat Detector
• Thermocord Activation
Activation with thermocord/axis
• Manual (Hand-Operated Extinguishing Units)
Activation by pulling safety pin
Design
Watch Video Demo of FirePro® Unit Design for these type :
FP-100 click here
FP-2000 - FP3000 - FP5700 click here
Overview of FirePro® Unit :
- Firefighter of the metal containers of various shapes and sizes
- Solids, aerosol forming compound SBK
- A special system built into each FirePro® container / unit for activation of independent fire extinguisher
- Most types equipped with a mechanism to absorb heat (depending on application)
FirePro® Certificates
|
|
| |
FirePro Classification